Standard and High Efficiency
Comfort Coils
Back
to Indoor Coils
 When
It Comes To Your Home Comfort System, There’s More To
The Story
Take a look at your home comfort system. If you have an air
conditioner outside, then you also have an indoor coil and
furnace inside. You might say the coil is the other, less
visible part of your system. While a coil may be a component
that you’re not very familiar with, it’s just
as important to your home’s comfort as your air conditioner.
And, because the coil was designed to work in tandem with
your outdoor unit and furnace, it’s important that they
match in both size and capacity.
Trane Can Help You
Make A Perfect Match
A matched system gives you maximum performance and efficiency.
And, that’s where Trane comes in. When you install a
new Trane air conditioner, your dealer can help you select
the right Trane Comfort™ coil to go with it. Remember,
your outdoor condensing unit and your indoor coil work together
as a team – a new air conditioner’s efficiency
will be significantly reduced if it’s paired with an
old, existing coil. And, an older coil, or a non-Trane coil,
may even differ in cooling capacity, leaving you with an unbalanced
system and higher than necessary utility bills.
 A
Comfort™ Coil For Every Application.
Trane manufactures an entire series of convertible comfort
coils in a variety of sizes, efficiencies and configurations
that will work with any installation or application requirement.
And, our coils were developed with the same exacting quality
standards as the rest of the components of a Trane home comfort
system. They were also designed to match Trane furnaces in
both fit and finish.
Comfort™
Coil Benefits
Easy
To Service And Clean
- Easy door
removal
- External
service port
- Foil insulation
Lasts
A Long Time
- Painted
finish
- Non-corrosive
drain pan
- 5-year
internal functional parts limited warranty*
Attractive
Design
- Perfect
match to furnaces
- Cabinet
finish complements system
Flexible
Application
- Models
for R-22 and R-410A refrigerants available
 Comfort™
Coil Features
-
Foil
Insulation
100% foil insulation provides easy cleaning and quiet
operation.
-
Two-way,
Sloped, Non-corrosive Drain Pan
Prevents standing water in drain pan which significantly
affects indoor air quality. Non-corrosive material prevents
rust.
-
Easy
Access
Makes cleaning and servicing easier which in turn leads
to higher efficiency and longer life.
- Painted
Finish
Provides increased protection from rust and corrosion. Matches furnace
in color.
- External
Service Port
Quicker and easier serviceability.
*Limited
Warranty
All Trane indoor coils have a five-year* parts limited warranty.
However, if you have indoor coils installed with a Trane XL
or XLi outdoor air conditioner or heat pump as part of a complete
system the coil will be covered for ten-years** under the
outdoor model functional parts limited warranty.
*Warranty valid on coils installed after October 1, 2001 and
manufactured on or after January 1, 2000. Earlier installations
have a one-year limited warranty.
 Why
A Clean Coil Makes A Difference
It’s not a pretty sight, but unfortunately it’s
fairly common. If your home’s indoor coil has never
been cleaned, chances are it could look like this. One of
the reasons is that many older coils are difficult to access,
so they’re harder to clean. Trane Comfort™ coils
have been designed with a three-piece door design so they’re
easy to access for both servicing and cleaning. As you can
imagine, a clean coil is a more efficient coil. It’s
also better for your home’s indoor air quality.
Back
to Indoor Coils
|
